Iron removal filter WATEX RCMB10x2

Manufacturer: WATEX

Product code: RCMB10X2

Price without VAT

€ 1,505.00

Price with VAT

€ 1,821.05

– +

In stock:

Delivery time: 2-5 working days

A simple solution for 5 problems - turbidity, iron, manganese, odour, arsenic
Regeneration does not require reagents - no salt, no potassium permanganate (KMnO₄)
Effective working even at low pH and high content of organics
High filtration capacity
Easy installation and operation
Filter service life is more than 10 years
Natural, environmentally friendly filtration process. Do not impair the water quality
Automatic purification and regeneration
High quality materials, components
Applicable for private houses, cottages, guesthouses, farms

WATER QUALITY PROBLEM

Iron and manganese often causes the main problem of the waterworks. When water gets in contacts with air, it changes the colour, turbidity increases and sediments appears. Water has a metallic taste. Water pipes are clogged and sanitation at the consumer becomes dirty.

APPLICATION

WATEX RCMBx2 series filters are designed to purify water from turbidity, iron, manganese and odor for villages, cities and industrial enterprises. Mainly it is used for groundwater purification.

OPERATING PRINCIPLE

RCMBx2 filter operating principle is based on aeration and filtration. When water is aerated, iron, manganese and mechanical impurities form sediment, which can be filtered. Suspended solids are filtered through filtration media, which has been poured in to filter. Filters depending on pollution levels and water consumption have to be rinsed regularly. Filters after rinsing are regenerated and can purify water. Equipment consists from reactor, two filters and compressor.

Show full description

Technical parameters of equipment	Unit	Model
Technical parameters of equipment	Unit	RCMB10x2	RCMB12x2	RCMB13x2
Flow rate Q_nom	m³/h	1.6	2.0	2.6
The amount of water for regeneration	m³	0.11	0.13	0.17
Minimum flow rate for rinsing	m³/h	1.6	2.0	2.6
Tank size (diameter)	inches	10	12	13
Tank size (diameter)	m	0.25	0.30	0.33
Tank volume	liters	64	85	110
The amount of filtration media	liters	43	57	73
Dimensions
Length	m	1.06	1.21	1.29
Width	m	0.25	0.30	0.33
Height	m	1.53	1.48	1.53
Water - drain connection	inches	1”	1”	1”
Filtration		Iron, manganese, turbidity, odor
Tank material		FRP (fiberglass)
Filtration media		AquaMandix, silica sand 0.4-0.8 mm, 0.7-1.25 mm, 1-3 mm, 3-5 mm
Operating pressure	bar	2-6
Electric Connection		220V, 50Hz, 1 phase
Electricity consumption	W	3 W

PRECONDITIONS

Sewer and electricity 220V connection
Input water pressure with a minimum pressure of 2.5 bar
Room temperature above 0° C
Water temperature to 25° C
Correct system installation

SYSTEM MAINTANANCE
Filters will provide with good quality water if operating personnel will ensure proper air supply, and unnecessary air removal and regular rinsing processes. Water purification system does not require specific chemical admixtures that have to be refilled.

PRESSURE TANK
Pressure filter tanks are made from fiberglass with inner PE coating that can hold pressure up to PN10.

FILTRATION MEDIA
For water purification filtration media AquaMandix and quartz sand with different grain size (0.4-0.8 mm, 0.7-1.25 mm, 1-3 mm, 3-5 mm) is being used. Porous structure of AquaMandix provides a large active surface and provides efficient adsorption and accumulation of sediment.

CONTROL VALVE
The filter is equipped with an automatic Clack control valve which performs filtering and rinsing sequences automatically. Usually rinsing is performed at 2:00 at night.

AIR SUPPLY
For water aeration it is necessary to install air compressor. Air is injected in the water before it enters reactor.

ADDITIONAL EQUIPMENT OPTIONS: