Product catalog
Feel free to send a message and we will help you find what you are looking for!
WATEX CMS9 PLUS Water softer
Out of stock
Delivery time: 2-5 working days
Equipment characteristics:
- Effectively softens water, reduces high levels of iron (15 mg / l), manganese and ammonium in water
- High quality components
- Filter lifetime more than 10 years
- Intended for holiday homes, private homes, commercial establishments, etc.
- Automatic purification and recovery based on water consumption
- Regeneration with salt tablets (NaCl)
- Sewerage connection required. Rinse water can be discharged into Biological WWTPs
- Easy installation and use
- Economic exploitation
- The equipment does not remove odour. In addition, the WATEX CMB, CTO, AERO unit must be installed.
WATER QUALITY PROBLEM
Water hardness is a set of natural properties of water related to the concentration of calcium and magnesium salts. Although hard water is not harmful to human health, it can pose a serious threat to various appliances, such as washing machines, boilers, dishwashers and pipes, creating precipitation in pipelines and especially on heating elements. Using such water for washing laundry requires more detergent. Water hardness will reduce the quality life of sanitary equipment and increase energy consumption.
Iron and manganese often is observed in groundwater and is one of the main causes of problems in the water supply systems. When water gets in contacts with air, the colour of the water changes to yellowish or brownish and creates hard to clean stains on plumbing equipment - sink, faucet, shower, toilet etc. Because of the metalic taste and odour the water can have, it can cause discomfort and is not pleasant to drink. Household appliances get worn out and the pipes get clogged quicker.
SOLUTION
The solution of these problems for households and production needs is softening by WATEX CMS PLUS series ion exchange resin filters that are regenerated with NaCl. Water softening equipment also effectively reduce iron, manganese and ammonium.
FILTER PERFORMANCE
For recovery of filtration media (ion resins) reagent (NaCl or salt tablets) is used. Wastewaters produced in regeneration processes of equipment in WATEX CMS PLUS can be directly discharged to biological wastewater treatment plant. WATEX CMS PLUS consists of a filter column, control valve and salt tank. The filter column is filled with ion exchange resin (cationic), which reduces hardness and iron concentration in water. The control valve performs automatic regeneration. Salt tank is filled with a reagent (NaCl, salt tablets) for resin regeneration. Capacity of filtration media is calculated according to amount of resins and raw water quality. Remove from water increased iron content up to 15 mg/l.
FILTER CONTROL
WATEX CMS PLUS is equipped with a Clack WSCI1 control valve, with a built-in flow meter that performs filtration media regeneration according to water consumption. Flowmeter saves water and salt used for filter regeneration. The valve can be fitted with a bypass pipeline that allows to perform maintenance works with ease. Control valve saves all information in case of power failure. Equipment has many parameters that can be adjusted according to needs, such as washing time, frequency, reagent consumption, and so on. It is possible to change the water hardness.
Equipment technical parameters | Unit | Model |
WATEX CMS9 | ||
Flow rate* Qnom | m3/h | 0.6 |
Flow rate** Qmax | m3/h | 1 |
Maximum flow rate | m3/h | 3 |
One filter tank capacity between regenerations | liters | 3800 |
Incoming water quality for calculation | Iron – 2000 µg/l; Water hardness – 6,0 mg-ekv/l | |
Amount of water for 1 regeneration*** | liters | 100 |
Salt consumption for 1 regeneration | kg | 3.8 |
Minimum flow rate for rinsing | m3/h | 0.33 |
Pressure tank size (diameter) | inches | 9 |
m | 0.24 | |
Pressure tank volume | liters | 32 |
Filtering material volume liters | liters | 25 |
Equipment dimensions | ||
Lenght (L) | m | 0.56 |
Width (W) | m | 0.24 |
Height (H) | m | 1.41 |
Connection incoming/outgoing/drain | inches | 1”/1”/1” |
Clack control valve | CI 1” | |
Water treatment possibilities | Water hardness, iron, ammonium, turbidity | |
Pressure tank material | FRP (Fiberglass Reinforced Plastic) | |
Filtering material | Ion exchange resins Resinex KW-8, quartz sand 1x3 mm, 3x5 mm | |
Working pressure | bar | 2-6 |
Electric connection | 220V, 50Hz, 1 phase | |
Electric consumption | W | 3 W |
* Filtration speed 25 BV/h
** Filtration speed 40 BV/h
*** Volume can multiply if incoming water quality changes
EQUIPMENT MAINTENANCE
Although the equipment uses salt tablets for regeneration it is safe to use filtered water for drinking and other human needs. It is necessary to provide electricity connection power (one socket), sewerage drainage and incoming / outgoing water supply with minimum pressure of 2.5 bar.
RECOMMENDATIONS:
- Before selection of equipment, it is recommended to test raw water chemical composition.
- Before the water filter, it is preferable to install mechanical filter to ensure long-term equipment service life.
Additional equipment options:
- Condensate isolation for tank
- By-pass valve – For easier assembly
| Width (cm) | Height (cm) | Length (cm) | Weight (kg) |
|---|---|---|---|
| 25 | 140 | 55 | 40 |
This is a good choice!