WATEX CMA8 MultiMix water filter for water treatment

WATEX CMA8 MultiMix water filter

Manufacturer: WATEX

Product SKU: CMA08

Price including VAT € 787.40

Price excluding VAT € 635.00

Product is in stock

Delivery time: 2-5 working days

APPLICATION

WATEX CMA series devices are organics reduction equipment for household use. It is able to purify from not only hardness, but also purify water from organics and iron. In purification process reagent (NaCl or salt tablets) has to applied for filtration media (resin) rinsing. Rinse water can be discharged directly to biological WWTP (wastewater treatment plant).

OPERATION AND APPLICATION

WATEX CMA series consists of a filter column, the control valve and salt tank. The filter column is filled up with ion exchange resin mixture (cationic and anionic), which reduces organics, ammonia, hardness and filters iron. The control valve performs automatic rinse. Salt tank is filled with the reagent (NaCl salt tablets) that is used for rinsing. Amount of water that can be purified is set depending on the amount of resins in equipment and provided water quality.
The equipment can also purify water from iron, but the iron content must not exceed 3.0 mg/l.
Although the equipment uses salt tablets for filtration media regeneration, water that has been purified can be used for drinking and satisfaction of other human needs.
The equipment requires an electrical connection (one socket) and a minimum inlet water pressure of 2.5 bar. Water connections: 1″.
Equipment can be installed in wet areas or underground mines, which are made of concrete rings.

FILTER CONTROL

The product has many parameters that can be adjusted according to your needs, such as rinse time, frequency, reagent consumption, and so on.
WATEX CMA series equipment is equipped with a Clack WS1CI control valve with built-in flow meter that allows to perform filter rinsing according to water consumption. Flowmeter saves water and salt needed for rinsing. Filter can be equipped with bypass line, which allows to switch off equipment and quickly perform preventive maintenance. Control valve saves all information in case of any power failure.

RECOMMENDATIONS

It is recommended to install mechanical filter before equipment to ensure long equipment life.

Width (cm)	Height (cm)	Length (cm)	Weight (kg)
25	130	55	24.25

Width (cm)

Height (cm)

Length (cm)

Weight (kg)

130

24.25

Technical parameters of equipment	Unit	Model
Technical parameters of equipment	Unit	WATEX CMA8
Flow rate Q_nom	m³/h	0.6
The amount of water for regeneration	liters	150
Minimum flow rate for rinsing	m³/h	0.6
Tank size (diameter)	inches	8
Tank size (diameter)	m	0.20
Tank volume	liters	25
Total amount of filrtation media	liters	15
Dimensions
Length	m	0.53
Width	m	0.20
Height	m	1.08
Water – drain connection	inches	1”
Clack control valve		Cl 1''
Filtration		organic admixtures, hardness, iron, turbidity, ammonium
Tank material		FRP (fiberglass)
Filtration media		Ion exchange resins RESINEX KW-8 and TPX4500, silica sand 1x3mm, 3x5 mm
Operating pressure	bar	2.5–6
Electric Connection		220V, 50Hz, 1 phase
Electricity consumption	W	3 W
Flowmeter		built-in

Product catalog

WATEX CMA8 MultiMix water filter

Related products

Product catalog

WATEX CMA8 MultiMix water filter

Related products

Your application is sent